We use cookies to improve your experience on our website.  By continuing to use our site we will assume you accept these cookies.
We use cookies to improve your experience on our website.  By continuing to use our site we will assume you accept these cookies.

SD-WP31C

SD-WP31C

The SD-WP31C 3×1 Wallplate Transmitter Switcher is designed to switch and extend HDMI or Slimport input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

The switcher also features two HDMI and one Type-C USB inputs, it can be selected by the SOURCE AUTO button on the front panel

Key Features

  • Supports HDMI signal up to [email protected] 4:2:0, Slimport signal up to [email protected] 4:4:4
  • Supports HDMI 1.4 standard and HDCP 2.2 compliant. Ensures display of contentprotected media and interoperability with other HDCP compliant devices
  • Active input automatic detective
  • Extending HDMI signal [email protected] up to 131ft/40m and [email protected] up to 229ft/70m
  • Supports RS232 pass-through with HDBaseT connection and local control
  •  Supports IR pass-through to extend IR signal to control display device
  • The DISPLAY ON/OFF button can be programmed by IR learning feature or RS232 command
  • The HDBT port supports 24V-48V PoC input and compatible with 48V PoH, the switcher can be powered from the compatible HDBaseT receiver by the CATx cable, and it also supports 24V PoC output
  • Firmware upgrade by Micro-USB port.

This Wall Plate HDBaseT Extender is one of the latest SEADA products for a total AV solution.

The SD-WP31C is the 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or Slimport input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

The switcher features two HDMI and one Type-C USB inputs, it can be selected by the SOURCE AUTO button on the front panel. The switcher supports CEC. The DISPLAY ON/OFF button on front panel is used to control the far-end display device, and it can be programmed by IR learning or RS232 command to ensure the compatibility with various display devices. Moreover, 24V-48V PoC allows the switcher can be powered from the compatible HDBaseT receiver.

INPUT
INPUT (2) HDMI, (1) USB-C (Slimport)
INPUT CONNECTOR (2) Female type A HDMI, (1) Type-C USB
HDMI INPUT RESOLUTION Up to 4K/[email protected] 4:2:0
SLIMPORT INPUT RESOLUTION Up to 4K/[email protected] 4:4:4
OUTPUT
OUTPUT (1) HDBT OUT
OUTPUT CONNECTOR (1) RJ45
HDBT OUTPUT RESOLUTION Up to 4K/[email protected] 4:2:0
CONTROL
CONTROL PORTS (1) IR, (1) FIRMWARE, (1) RS232, (1) IR IN
CONTROL CONNECTOR

(1) Built-in IR sensor

(1) Micro-USB

(2) 3-pin terminal block

GENERAL
BANDWIDTH 10.2Gbps
TRANSMISSION HDBaseT
HDMI VERSION 1.4
HDCP VERSION 2.2
TRANSMISSION DISTANCE [email protected]≤40M, [email protected]≤70M
EXTERNAL POWER SUPPLY Input:100V~240V AC; Output: 24VDC 1.25A
POWER CONSUMPSION 5W max. (SD-WP31C only – add extra for HDBaseT receiver)
OPERATION TEMPERATURE -10 ~ +40℃
STORAGE TEMPERATURE -15 ~ +55℃
RELATIVE HUMDITY 10% ~ 90%
DIMENSIONS (W*H*D)

SD-WP31C-EU: 151mm x 80mm x 39mm

SD-WP31C-UK: 146mm x 86mm x 39mm

NET WEIGHT 230g
Translate »