We use cookies to improve your experience on our website.  By continuing to use our site we will assume you accept these cookies.
We use cookies to improve your experience on our website.  By continuing to use our site we will assume you accept these cookies.

Wall Plate HDBaseT Extenders

Wall Plate HDBaseT Extenders

Key Features

  • Supports HDMI signal up to [email protected] 4:2:0
  • Supports HDMI 1.4 standard and HDCP 2.2 compliant. Ensures display of contentprotected media and interoperability with other HDCP compliant devices
  • Extending HDMI signal [email protected] up to 131ft/40m and [email protected] up to 229ft/70m.
  • Supports RS232 pass-through with HDBaseT connection and local control
  • Supports IR pass-through to extend IR signal to control display device
  • The DISPLAY ON/OFF button can be programmed by IR learning feature or RS232 command.
  • The HDBT port supports 24V-48V PoC input and compatible with 48V PoH, the switcher can be powered from the compatible HDBaseT receiver by the CATx cable, and it also supports 24V PoC output.
  • Firmware upgrade by Micro-USB port

Overview

SEADA’s Wall Plate HDBaseT Extenders are 3×1 Wallplate Transmitter Switchers.

The SD-WP31C is a 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or Slimport input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

The SD-WP31V is a 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or VGA input signal to far-end display device, and the transmission distance is up to 131ft/40m at 4K and 229ft/70m at 1080P video by using a single CATx cable.

 

Product Range

SD-WP31C

The SD-WP31C is a 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or Slimport.

SD-WP31V

The SD-WP31V is a 3×1 Wallplate Transmitter Switcher, which is designed to switch and extend HDMI or VGA.

Translate »